-
Would it be within the scope of this lib to support L2CAP communication? Looking into it for a prototype we are working on.
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Cor…
-
Hi ,
I am facing issue to pass below PTS test case, Can any one provide solution?
L2CAP/LE/REJ/BI-02-C i getting failed because the device did not correctly handle unsupported L2CAP cammands co…
-
I'm using the config file called "sdkconfig_display_ttgo_tdisplay.defaults" as the configuration file.
I have the TTGO T-Display hardware .
when building the "firmware" an executing the `idf.py fl…
-
Hi any plan to support l2cap?
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
(Disclaimer: I'm using the esp-nimble fork, but that should be irrelevant in this context)
Usage case: In my application, I have various subsystems (BLE/L2CAP, WiFi, Ethernet) which all provide acc…
-
hi i am having a problem with uploading it to my board i am just trying to run the
`
#include
void setup()
{
ps5.begin("1a:2b:3c:01:01:01");
Serial.println("Ready.");
}
void lo…
-
For Linux, `bluer` already offers a great L2CAP [module](https://docs.rs/bluer/latest/bluer/l2cap/index.html) that could be stubbed. For iOS, @akiles started work doing this in their own `bluest` [for…
-
Our sister project for Windows, [MagicPods](https://github.com/steam3d/MagicPodsCore), has reverse engineered reading and writing data to AirPods.
* The good news is that this actually works and I …
-
- 编译环境:
平台:window11
esp-idf版本:5.1.3
- 报错情况:
操作:正常将固件烧录进esp后,屏幕正常显示,按键正常,imu测试正常(题外话:麦克风我用你的测试代码测试了一下,是可以正常采集到信号的,可能是佬你的那个硬件出了点问题),但在那个网页连接设备后,貌似esp这边就卡死了
log:
```
[00:00:00] [I] rtc time: …