-
Hello.
I have a problem with my setup. I got no output with the examples of the hzeller/rpi-rgb-led-matrix library. I use a RPI 2b v1.1 and a Adafruit RGB Matrix Bonnet to drive a 64x64 LED Matrix …
-
### Background info
Currently the XC16 compiler in MPLAB X standard uses the C89 standard. However it is possible with the `-std=c99` option to use the C99 standard. Although this is still quite an o…
-
Hi,
would it be possible to enhance the pico_LedCube example to support the 12 PIO state machines of the new Pico 2 (RP2350) for 12 parallel outputs?
I'd be seriously interested to try to convert …
-
Hello! Today, I found some weird glitching with some ws2812b leds.
### Hardware/Software:
```
Platformio under VSCode
FastLED 3.4.0
ESP01-F (ESP8285)
A custom pcb (the 6 pcbs are soldered tog…
-
Hello! I am not good at English, so I use a translator. If I don't understand it, I'm really sorry~!
When I was using ws2812 to flash into the demo on GitHub, although the light turned on correctly, …
-
I'm using V1.6.1 of freerouting and V 6.5.5 of easyEDA
I'm running it on windows11 64 bit system x86
[dsn and ses file.zip](https://github.com/freerouting/freerouting/files/8966799/dsn.and.ses.file…
-
I get a bit of flicker on the adafruit version so I am trying the https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
It works great with hzeller examples: ie
"sudo ./…
-
Hello,
I can run the normal examples fine but I'm having troubles using the ledcat example, would it be possible to provide an example command ?
Thanks !
natcl updated
4 years ago
-
Because the symbol table is made out of a dictionary where the keys being used are the IDs of the variable themselves, this causes the previous element with the same key to be overwritten with the new…
-
### Milestone when a single layer can be controlled
#### Steps
- [x] Write a function that uses a loop or loops to set certain 'pixels' in a layer, using the `LedCube_setPixel` function. To begin with…