-
I'm trying to build a container based on Debian to use C++ with the version 2.x.x of libgpiod.
I've noticed that the package libgpiod-dev that is in the Debian package manager is currently in vers…
-
### Script Command
```shell
cd ~
# sudo apt-get install python3-pip
# sudo pip3 install --upgrade adafruit-python-shell click
# wget https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Install…
-
Potential min libgpiod version or ifdefs required.
```
../src/line.cc:24:99: error: ‘GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE’ was not declared in this scope; did you mean ‘GPIOD_LINE_REQUEST_FLAG_OPE…
-
I am using libgpiod 1.6.2 on a RPi ~3B~ 4B with Raspbian Bullseye. I have implemented an interrupt monitor strictly following [this](https://github.com/brgl/libgpiod/blob/v1.6.x/bindings/cxx/examples/…
-
Are there any plans to add support for [libgpiod](https://github.com/brgl/libgpiod) as a pin factory, which is the current recommended way of accessing the GPIO pins on the Raspberry Pi (see for examp…
-
Coming from everything working in Jetpack 5, I am unable to get pin 32 working in Jetpack 6. Pin 33 works, Pin 32 doesn't. It does work through gpioset but not through jetson-gpio.
https://forums.d…
-
Libgpiod v2 has been released. The new version has incompatible APIs with the older version and therfore mcbinfand does not build on the newer lib.
Fale updated
10 months ago
-
I would like to check the current state of a particular line. I have a problem, because after setting the state, for example, for gpiochip0 line 200 (gpioset 0 200=1) I am not able to check through gp…
-
And tools.
-
如题,请问有支持 libgpiod 的计划吗?