-
I have some problems with the installation in ROS Noetic, Ubuntu 20.04.
I installed the libmodbus library, both from binary or from souce, and configured and make install. Anyway, libmod library fi…
-
I'm trying first-time install:
> compile static libmodbus library
done:
libmodbus 3.1.4
===============
prefix: /usr/local
sysconfdir: ${prefi…
andig updated
7 years ago
-
## libmodbus version
libmodbus-3.1.11
## OS and/or distribution
Arch Linux AUR (libmodbus compiled from source), Docker (Alpine)
## Environment
x86_64, aarch64
## Description
I …
-
Running in to a similar (if not the same), issue as mentioned in https://github.com/networkupstools/nut/pull/2063#issuecomment-1905299561
This is with a 2020 SMT2200RM12U, connected via USB and att…
-
## libmodbus version
3.1.10 plus Modifications
## OS and/or distribution
ESP-IDF Release v5.3
OS is a FreeRTOS
## Environment
Planned to run on all ESP32 Derivates,
so Architectu…
-
0.7 при установке собирает libmodbus-3.1.4 (вроде бы патченую) и устанавливает вместо уже установленной в системе версии. В теми же именами и сонеймами библиотеки. Таким образом, нельзя безопасно уста…
-
Hello, I found a __SEGV__ in stephane/libmodbus/unit-test-server.c.
__Below are Steps Followed to Reproduce Crash__
Download latest source code from: stephane/libmodbus/unit-test-server.c, compil…
-
According to the Usenix paper, a libmodbus version had been used for OpenPLC that is vulnerable to a buffer overflow. The buffer overflow can be verified by issuing an according "Read Registers" comma…
-
Have tried a few times to get NUT installed with usb modbus support and haven't been successful.
I last tried following this:
https://github.com/networkupstools/nut/wiki/APC-UPS-with-Modbus-protocol…
-
## libmodbus version
libmodbus-3.4.1
## OS and/or distribution and Environment
Linux 3.4.7 compiled for ARM
Configuration: RTU with 9600 bauds (N, 8, 1)
Modbus meter Garo with **respo…