-
hello, i have an inverter mpp pip max 11kw ( comunication rs485) and 2 battery H-VAC 9.6kw ( ccomunicaton can), i buy from MPP protocol for LIA CANBUS ( they sent an pdf file), how can i make an execu…
-
Can be used for lifepo4 with out any changes in a code?
-
https://t.me/s/dmtucao
https://lifepo4.top/
![image](https://github.com/user-attachments/assets/51f8ec92-0f16-415d-b23b-1bf147e6c5ef)
-
In order to support this different cell chemistry, we should consider:
- Mechanical concerns, how big LiFePO4 cells in their typical sizes are we able to fit,
- A separate 3S1P and 3S2P PCBs with ap…
-
**What kind of device or service would you like to see an adapter for?**
Powerqueen MPPT Laderegler
https://www.ipowerqueen.de/products/power-queen-30a-mppt-solarladeregler-solar-laderegler-mit-eins…
-
### What happened?
Hallo, da ich hier Jungs vom Fach und Entwicklung habe folgendes Problem, ließt man oft:
Ich besitze einen Hoymiles HM-800, dieser produziert insgesamt 810,9W (siehe Bild Shelly…
-
Hi,
I have a new battery with a BT BMS:
It is a [Vatrer Power 51.2v 100ah LiFePo4](https://youtu.be/1n8ZkgtLBt0?si=UM3RFA2l9P-JnBKO&t=627) battery - the BMS should be [Jiabaida / JBD SP16S020](h…
-
Hello, i have connected 128 LiFepo4 Cells (18S 8P) via 8 pcs "All In One Module V490" to an "Controller Board V4.6" and that all is connected via Can Bus to an 48V Victron System.
Now i want to ext…
-
Hi thank you for making these files and schematics available! Do you have any suggestions on part numbers that should fit with the existing layout for the USB PWR CONNECTOR on the LiFePO4 PowerBoards?…
-
LiFePO4 batteries are getting more common. They require more detailed management that is typically handled by a Battery Management System. BMSs can produce data on a cell as opposed to battery level a…