-
could this firmware be made to work with the lilygo twr plus. it seems it is similar hardware
-
**Describe the bug:**
While Brucegotchi is running, it is impossible to use menu which pops up when middle button is pressed. Menu exits within 1 sec.
**Steps To Reproduce:**
- Device used: …
-
### Expected Behavior
I have a single 12S2P 6,85kWh module with ~44V out of a VW.ID3 battery pack connected with a Daly smart BMS supporting CAN/RS485 etc. How a single battery module from the resp…
-
```
esphome --version
Version: 2024.8.0
```
```
pio --version
PlatformIO Core, version 6.1.15
```
@nickolay, I was trying to follow the steps on README, and it didn't work.
ota syn…
-
When the voltage level on USB/Vin (Vbus) drops the LilyGo T SIM7670G S3 switches the power (DVDD4V2) from Vbus to the battery (Vbat). During this switch the ESP32 s3 restarts, probably due to a power …
-
I was trying to print a shell or case for a 4.7"-S3 V2.4 from the files here: https://github.com/Xinyuan-LilyGO/LilyGo-EPD47/tree/esp32s3/shell
The prints came out much smaller than than the device…
-
Hi, I have been working on Platformio previously and I need to do the firmware upgrade, so I download the Arduino IDE to follow the step here:
https://github.com/Xinyuan-LilyGO/LilyGO-T-A76XX/blob/ma…
-
I think I'm experiencing the similar problem with:
https://github.com/Xinyuan-LilyGO/LilyGO-T-A76XX/issues/122#issuecomment-2298353188
![image](https://github.com/user-attachments/assets/ca332fac-…
-
Czy będzie opcja wsparcia tego urządzenia i podobnych opartych na module SX do odczytu wmbus ?
-
### Hardware
LilyGO T-Internet POE
### Firmware version
V.2.4.6
### Application version
V.2.4.6
### What happened? What did you expect to happen?
when i press reboot command the board going …