-
The options are
- Frequency-response analysis ([implemented in JSControl](https://help.juliahub.com/juliasimcontrol/dev/linear_analysis/#Frequency-response-analysis)), only applicable to stable model…
-
According to [datasheet](https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf), page 8, max31855 assumes a linear relationship between temperature and voltage, which is not accurate. For accurate…
-
In the following code in `src/approximations/linearization.jl`:
https://github.com/ReactiveBayes/ReactiveMP.jl/blob/308dce4649faf8bb720e7e66750b87844b840448/src/approximations/linearization.jl#L68-L8…
-
Currently, we allow the selection of any ancestor as a linearization parent.
After discussion with Can, we need to allow only the direct parents as linearization parent. Therefore, it is not necessar…
-
Hello! In `color_converter.dart`, `linearize` and `normalize` are each doing the opposite of what they're supposed to do. `normalize` turns the color into a linear space, and `linearize` turns it into…
-
**When I try to linearize my model, I get an "BoundsError: attempt to access 302-element Vector{Vector{Int64}} at index [303]" error🐞**
Here is my Julia/MTK statement with partial error message:
`…
B-LIE updated
1 month ago
-
Currently, in the linearization specifications of an ICD entities, we reference the linearizationViews using IRIs (e.g., "linearizationView": "http://id.who.int/icd/release/11/mms"
The model for th…
-
The linearization workflow below took
```julia
julia> @time batch_ss(model, :u, :y, ops);
0.108045 seconds (731.06 k allocations: 60.930 MiB, 0.00% compilation time)
```
on MTKv8
while on mast…
-
It seems that when spindle linearization is enabled, the values of $31 (Setting_RpmMin) and $35 (Setting_PWMMinValue), are not used for computing the conversion from pwm_data to pwm_value.
https://…
-