-
`fastboot boot` or `fastboot flash boot ... && fastboot reboot` **with lk1st** always cause `DTB offset is incorrect, kernel image does not have appended DTB`, even with lk2nd image.
lk1st was instal…
wctrl updated
2 months ago
-
Is this expected behavior?
```
$ fastboot getvar product
product: LK1ST_MSM8916
Finished. Total time: 0.002s
$ fastboot flash partition ./gpt_both0.bin
Sending 'partition' (33 KB) …
-
I have a msm8953 device(huawei maimang 5,same as G9 plus,nova plus) and just build a lk1st on it.But my device has enabled secure boot so it cannot boot my costum bootloader. I want to port with this …
-
I have a msm8953 device and I want to enable KVM on it.I have a kernel with KVM module builded.But I have not finished lk1st build,the drive have some bug.
-
当前v1版本,预留了约170MB内存给驱动,系统无法使用。
`Memory: 350280K/524288K available (9664K kernel code, 1212K rwdata, 3644K rodata, 1728K init, 358K bss, 141240K reserved, 32768K cma-reserved)`
如果不需要使用4G功能以及相关驱动,是…
-
I'm unable to boot into rom and this is the UART log:
```
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IM…
-
I have a huawei device which has a msm8916.(t1-823l)
I can enter the edl mode by short clk/dat0 to gnd.
I can see 9008 device on my computer.
I am almost making sure that it has disabled sec…
-
![Screenshot_2022-12-10_05-01-19](https://user-images.githubusercontent.com/70055899/209175400-0252120b-1df3-4e6c-b0cc-55e567e93efd.png)
# lscpu
![Screenshot_2022-12-10_05-04-51](https://user-im…
-
Found some MSM8916 devices shipped with trustzone firmware running entirely in AArch32 mode (both EL3 and Secure EL1)
>$readelf -a tz.elf
ELF Header:
Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 …