-
I am using a [EBYTE E220-900M22S](https://www.cdebyte.com/products/E220-900M22S) module that comes with a LLCC68 chip connected to a ESP32 D1 mini. I am experimenting with the SX126x_Channel_Activit…
-
Hi,
I recently built a diy tracker on esp32 and Ebyte E220 400M30S (LLCC68)
The problem is that it doesn't start, I keep getting this error:
Starting LoRa failed! State: -2
Everything is wired rig…
-
### Please ask your question
I have a few of the DL-LLCC68-S 915MHz LORA modules from [LCSC](https://www.lcsc.com/product-detail/LoRa-Modules_DreamLNK-DL-LLCC68-S-915_C2894791.html) and I'm planning …
-
I'm using a DreamLNK LLCC68 915MHz SPI LORA module available from [LCSC](https://www.lcsc.com/product-detail/LoRa-Modules_DreamLNK-DL-LLCC68-S-915_C2894791.html) and I'm having trouble getting it to w…
-
Hello,I am using LLCC68 now, because SF=7BW=125K, frequency hopping is necessary to pass FCC certification, can LLCC68 use this code? If you can't use LLCC68, is there any other solution to make it ac…
-
Boards: https://heltec.org/project/wireless-stick-v3/
Trying to send "hello" messages between the two of these and instead receiving garbled (seemingly not random as they repeat) characters:
```
…
-
Hello! I would like to consult LoRa using the LLCC68 module?
-
Hello!
I'm trying to run a basic example of LoRa Send using a ESP32-S3 in a board integrated with a LLCC68 tranceiver.
I'm getting an SetRX Illegal Status error, as can be seen in the log as follows…
ThiSo updated
2 weeks ago
-
I can use LLCC68 module to send data normally, but if I combine the receiving and sending code together, after the sending code is executed, the serial port will print the received garbled data
![企…
-
Hello, this is not a bug in library itself, just a warning and maybe suggestion for enhancement (adding the check). The new V2.1 modules (PCB versions 10498-V1.1 and 10497-V1.0) delivered in December …