-
Recently purchased an H2S-A1 sensor from co2meter and request help using the sensor with the LMP91000 and an Arduino, or other example code using the H2S sensor as a reference.
-
The MENB circuitry and logic is contained in the PSAT circuit and should be removed from the LMP91000 library. Ideally, the LMP91000 library is board/pin agnostic.
-
After I configured it as required in the README (https://github.com/LinnesLab/LMP91000/blob/master/README.md), in the cyclic voltammetry test, I used a multimeter to test the voltage between WE and RE…
-
The LMP91000's GNDA is not directly connected to the system digital GND or to the ground of the ADC.
-
Hello
Good evening,
I would like to use your library (LMP91000) with Arduino (or Teensy).
Your library should be what I need.
I would like to do Cyclic Voltammetry - CV.
However I'm not sure exac…
-
Dr. Burke,
I have one more question about applications of the Nanostat, then I promise to leave the issues board alone for a while.
Do you think the Nanostat hardware would be capable of constan…
c-jw updated
8 months ago
-
Hello, I am very impressed by what you shared in the NanoStats project. Currently I have a Potentiostat project with the required Cyclic voltammetry range from -1.5V -> 1.5V. Does your project meet th…
-
Hardware: STM32 Blue Pill (STM32F103C8)
Boot using STLINK V2
Board Manger: https://github.com/stm32duino/BoardManagerFiles/raw/main/package_
The error: The "Timer1" was not declared in this scope
…
-
I was building this for my SteamDeck and noticed that during compiling, it was building things like drivers for Wifi Chipsets the Steamdeck doesn't have, as well as things like Nouveau.
Would it ma…
-
Memory tagging is great, but as per my understanding, it doesn't protect against in-object overflows and ROP exploits.
ARM introduced some time ago the [PAC extension](https://learn.arm.com/learnin…