-
**Describe the bug**
When i have more then one LN882H device connected to my Unifi WiFi only the first connected one of them works, the others go in to a reboot cycle, despite being shown as connecte…
-
How reset password administrator webUI LN882H ?
Firmware and safe mode do not give anything.
-
**The MQTT set message is received by device but it seems ignored**
When i try to set the relays status of the device using
```
mosquitto_pub -h localhost -t "luce-balcone/39/set" -u "username" -P …
-
I have purchase a smart switch from Aliexpress, but unlike what I expected the chip is not a BK7231N/T or similar but a TR6260.
By researching the web I found the following information:
https://ww…
-
I am trying to use SSID2 with no success. It always connects to SSID1 only (CFG_GetWiFiSSID() and CFG_GetWiFiPass()).
I couldn't find code in the source code that uses CFG_GetWiFiSSID2() and CFG_GetW…
-
**Describe the bug**
After running the device for 2 hours, it becomes unresponsive. the following can be observed:
- not connected to wifi anymore
- ofcourse, no more mqtt
- doesnt respond to butt…
-
Subscribe to this issue and stay notified about new [daily trending repos in C](https://github.com/trending/c?since=daily)!
-
**Describe the bug**
calling discovery for home assistant causes a memory error
and it fails to send the discovery message
**Firmware:**
- Version LN882H_Test
- Device? ali smart mini switch
…
-
**Describe the bug**
At the moment, rssi is not implemented for LN882H, so GUI for LN882H always shows
_Wifi RSSI: Excellent (0dBm)_
![No_rssi](https://github.com/openshwprojects/OpenBK7231T_App…
-
**Describe the bug**
When trying to get status with NTP enabled, request crashes device.
This seems to be inside file `src/httpserver/json_interface.c` in
`static int http_tasmota_json_status_ge…