-
### Current Situation
I picked up a few of these boards and I am hoping I can get this project loaded up on them? Unfortunately I'm having a hard time picking the right board/platform (I think?)
h…
-
Hi
I upload gps sketch to arduino pro mini and its work juts fine. Then i try use DIY lora32u4 whit adafruit board and bsfrance board setup but i allways got error:
Arduino_LoRa_GPS:144: error: …
-
I'm using ATmega a 3.5" touch screen and a Adafruit LoRa radio as a remote gate and kennel opener. It works like a charm so thank you for providing all the tools needed to make it happen.
But now I …
-
Had a old board laying around and wanted to try your code on this board.
Atmega32u4 and SX1276
-
The boards.txt file references a non-existent file. Is there a way to acquire it, or is it unnecessary?
When I try to upload a sketch, I see this error message:
```
Bootloader file specified b…
-
I have the same issue as @yijenlu1971 in https://github.com/sandeepmistry/arduino-LoRa/issues/170#issuecomment-406109594_
The sender doesn't send unless its connected to a computer via USB.
I …
-
PPM is crappy. Use CRSF protocol to get data from Taranis
-
Hello,
I saw quite a lot of tutorials, advices, DIY, to solve my problem, but I still can't reach the solution.
I have an Adafruit 32u4, wired IO1 to 6, pin mapping modified as follow:
const lmic…
-
This is actually not an issue, I wanted to say thanks for this project! This project was my first step into Arduina and Lora :-)
For anyone who also likes to built this I wanted to share my struggl…
-
Hello,
I've used this library for my sensor node, but I would like to know if it is possible to take control of the loop? What I'm trying to achieve is is something like this:
```
loop() {
reads…