-
Updating /config/esphome/lorawan.yaml
------------------------------------------------------------
INFO ESPHome 2024.10.3
INFO Reading configuration /config/esphome/lorawan.yaml...
ERROR Unexpec…
-
Hello, I want to test lorawan now, but I can't get any further because the yaml can't be compiled in esphome.
here is my yaml, and the error message.
`Updating /config/esphome/lorawan.yaml
------…
-
**Describe the Bug**
When I setup monitoring for the cacti, I verified that the devices could upload to dirtviz when connected to my laptop. When I plugged them into a USB power hub, empty payload me…
-
Trying to use `RADIOLIB_DEBUG_PROTOCOL` to get a understanding of why my device works better with some LNS than others.
When I enable `RADIOLIB_DEBUG_PROTOCOL` in `BuildOptUser.h` the console just …
-
This ticket follows a [discussion](https://forum.rakwireless.com/t/multicast-fail-with-rak3372-node-rak2287-gateway-and-chirpstack-network-server/13437) I had on the RAKwireless forum.
There seems …
-
Hi there,
I recently got my T-ETH-Elite with the LoRaWAN-Shield, the LoRaWAN-Module(SX1302), the LTE-Shield, and the LTE-Modul (A7670E). Now I want to build a Gateway which recieves the LoRa-Data a…
-
Hello Ropg,
Luckily I found your library. The Heltec libraries and instructions are terrible. I have a device on which I have installed the Lora example. After entering the TTN access data via the …
-
The code compiles fine but when i upload it to my Heltec WiFi LoRa V3 board the Serial Monitor shows the following error before doing a reboot:
```
joining...
Guru Meditation Error: Core 1 pa…
-
Every example from your repository fails to compile and throws this error message:
"Invalid FQBN: Heltec (unofficial) esp32:heltec_esp32_lora_v3"
Previously done:
Already installed RadioLib@7.0…
W4KRL updated
1 month ago
-
Hello,
as a follow-up to the discussion started at https://github.com/atomvm/AtomVM/discussions/1125, I'd be interested to know what it would take to have LoraWAN support to AtomVM.
I saw that sup…