-
This may be related to #294 . I am trying to use gpredict for greencube. To define both the uplink and downlink frequencies, I added the following section to `~/.config/Gpredict/trsp/53106.trsp`:
```…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
I have a X9E…
-
Hi,
I really appreciate your useful library. However, I encountered a problem: I couldn't tune to frequencies under 87MHz because I live in Japan, where our frequency range is between 76 - 108MHz. …
-
### SOC
Other
### Lora IC
SX1262 (inside STM32WL)
### Product Link
https://www.seeedstudio.com/LoRa-E5-mini-STM32WLE5JC-p-4869.html
### Description
There is currently a variant of the firmware …
-
Hello,
I try to receive wireless MBUS Telegrams e.g. from Smoke Detectors, Water Meters and Heat Cost Allocators. I war able to configure the CC1101 in the Examples according to the wMBUS specificati…
-
From Issue #14
Now that Jason has the Kenwood Nextedge capable repeater, I believe the TODOs are:
- [ ] Reprogram for new frequency. Perhaps 146.940 or 145.230.
- [ ] Find a new duplexor for …
-
Add underwater radios (and underlying calculations)
A few points to be considered:
- Underwater Communication is not trivial
- Only low frequency communication is useful
- Investigation on Radios and…
-
With the WIFI off the remote had a current draw of only ~30mA, but when the ESPNOW radio is turned ON, the current consumption increases to 100mA.
This reduces the battery runtime to 4 hours or les…
-
The CTCSS processing code in branch lordmorgul:ham2mon:wbfm_ctcss_processing was partially tested working, it needs refactored into this fork to work.
It currently does remove the tone from the aud…
-
There seems to be a problem with RegIrqFlags, which causes problems in **LoRaSimpleGateway** and **LoRaReceiverCallback** example sketches. The following is far beyond my knowledge, so please bear wit…