-
Hi there. can someone help me there i just can't get any further.
`> Executing task: C:\Users\Danjo\.platformio\penv\Scripts\platformio.exe run <
Processing LPC1768 (platform: https://github.com…
-
Hello, I was cleaning the nozzle/heatblock after some print failure with a copper brush, i know this is stupid but have done it a milion times before so i got lazy and confident.
either way, shorted…
-
Hi, if I currently try to compile marlin with Nozzle Park Feature / Advanced Pause, I get the following error:
CONFIGURATION:_ https://docs.platformio.org/page/boards/nxplpc-arduino-lpc176x/nxp_l…
-
Hi,
Does anyone know configuration for MKS Sbase with this sensor for dual switching extruder?
I have problem with compile. Runout sensor is 2, but i have only one stepper motor.
#error "NUM_RUNOU…
-
Hi there, how is it doing? I hope you all are having great days!
So;
On 2020, I have struggled a lot on DAPlink using interface LPC11U35 for lpc1768/88.
The project that I have taken as…
-
I have a issue with Compiling this Firmware for a org. Sapphire Plus.
Only i have change is the Board, to a MKS robin nano V1.X and Bltouch is pluged on Zmin_pin.
This is the Error for Compiling:
…
-
Hi Claudio,
I'm looking around for some hardware to retrofit into a laser cutter and use laserweb/grbl-lpc. I hope you have a moment to answer my question.
From looking at the grbl-lpc code it…
-
I get this compile error. attached are
[Marlin.zip](https://github.com/teemuatlut/Marlin/files/2501667/Marlin.zip)
my config file are attached. please advise and help.
Compiling .pioe…
-
Trying to compile Marlin latest bugfix to enable dual z axis. I uncomment :
#define Z_STEPPER_AUTO_ALIGN
and when build it fails with the following error:
compiling .pio\build\LPC1769\src\src\H…
-
Reproducible using Mbed Studio and mbed-os-example-blinky on Mbed-LPC1768 board. Started with a device with blank flash.
This is not caused by the device entering sleep mode. I had completely disab…