-
Hi, i am using Screen-4.7-S3 V2.3 2021-6-10 version of epaper. I am trying to i2c work but its seeing RTC address ( im assuming address: 0x51 ). However touch example and demo example for searching to…
-
This builds fine, but the demo doesn't start (more specifically, the LPS25 driver doesn't).
-
Looks like on boot, the micro start at a lower tension than the lps25 chip, which lead to a failed init of the chip and a non-working system.
-
If I run any task from vscode for example 'Build Hellen NB1' it always fails after the bootloader compilation with the following error:
Creating blbuild/fome_bl.list
text data…
-
Hi,
the other pressure sensor is deprecated, does the openlog support this one: LPS28DFW https://www.sparkfun.com/products/21221?
Regards, Gaute
-
### Category
Other
### Hardware
Rak4631
### Firmware Version
2.5.8.2ba72c15
### Description
When trying to compile customized firmware (using a fresh clone of the master branch) for a device _b…
-
Hello! Overall this sensor library has worked great for me in the past, but I am not seeing the correct behavior for LPS22_RATE_ONE_SHOT. I believe it may have worked correctly with this in the past,…
-
Thonny Version: 3.3.5
Log Files: Contain nothing excluding the version information
OS: Mac BigSur (M1 if it makes any difference)
I'm currently using Thonny with a Pi Pico and I'm working on …
-
I have a wide variety of temperature sensors (or sensors that include temperature) so I can collect data for a statistical comparison of accuracy and precision. All of the sensors are on a Raspberry P…
-
The photo for the Arduino Nano 33 BLE is actually a photo of an Arduino Nano 33 BLE Sense, its sensor filled cousin. Would you mind replacing the photo?
EDIT: Maybe we could reuse that photo if we'…
ghost updated
4 years ago