-
Hi,
I am trying to connect 4 of these Xiaomi LYWSD03MMC, they show up in the plugin, but I can only add 1 (just get errors if I try and add any more, and it only shows me the signal strength in Signa…
-
Yesterday I flashed 3 LYWSD03MMC one after the other from ATC BLE to Zigbee firmware 0x01233001 with TelinkMiFlasher.html. Integration into ZHA worked like a charm, until the morning.
The displays …
-
Had no issues flashing custom firmware version 4.7 when using https://devbis.github.io/telink-zigbee/ but when I try and flash the z03mmc.bin I get the below error it is hardware LYWSD03MMC HW:B1.5
…
-
Hi,
I've ordered 5 devices LYWSD03MMC (Hardware B1.5).
I've successfully replaced original BT firmware 130 with Zigbee one 1.20 for 4 ones.
I'm using them with Home Assistant / ZHA.
But, I was u…
-
Just bricked 2pcs of LYWSD03MMC
Hardware Version: LYWSD03MMC B1.4, Software Version: 9.9, Sensor: SHTC3 (SHTV3)
I'm doing flashing as described in readme:
1) ATC_ota_400000
2) reconnect with new…
-
I've 3 LYWSD03MMC that report a lot of noise on temperature value, it's a sensor problem or firmware/settings problem?
I have always this m…
-
After flashing the LYWSD03MMC with z03mmc 1.1.0 the device connect's to zigbee2mqtt.
Flashed first from OTA and after from UART but the problem persist.
The only available value is the battery, it …
-
Shelly Gen 3 and Pro devices support BTHome Components - https://shelly.guide/bthome-components/
this way you can bind Shelly BLU devices directly to other devices and use the sensors in scripts or s…
-
Hello,
today I received an update notification from Homeassistant for all my LYWSD03MMC-z devices. I tried this update with one device after the update was successfully the devices resets the calib…