-
[ESP-BSP](https://github.com/espressif/esp-bsp) is standard a mechanism how to work with a board.
The initialization sequence in case of M5Stack CoreS3 includes also Power Up of display using AW952…
-
M5Stack Core S3 is using FT6336 for touch control.
Please, consider adding this chip, so that M5Stack Core S3 simulation could react on touch event, same like there is ESP32-S3-BOX-3 simulation with …
-
### The problem
Hi team,
I have:
- 1 m5stack-atom-echo
- 1 raspiaudio-muse-luxe
- 1 esp32-s3-box-3
All of them are running ESP Home with the corresponding satellites.
I'm not able to use the…
-
The CoreS3 SE is basically a stripped down version of this board:
https://circuitpython.org/board/m5stack_cores3/
Compared to the M5CoreS3, the M5CoreS3 SE does not feature a camera (GC0308), pr…
-
Board Manager: M5Stack 2.0.0
Library:
ESP32-Chimera-core=1.5.2
LovyanGFX=1.1.12
M5Core2=0.1.8
M5Stack-SD-Updater=1.2.8
Module_GRBL_13.2=0.0.3
After flashing I am getting this while trying to boot:
…
-
I've been wondering how difficult this project would be to fork for the ESP32 M5Stack Core (Basic/V1 - with 3 physical buttons at bottom) as it uses the ili9342 for it's built in display, has built in…
-
Hi,
Thanks for your awesome and great work!
Would you be interessted in adding support for the Core controllers as well?
Seems like a Core controller with a commu and gps module has all the inter…
-
Hello,
I created a custom UIFlow2 firmare version (to add UTF8 font, see https://github.com/m5stack/uiflow-micropython/issues/25 ).
I can flash it via 'make flash_all', and load programs from http…
-
### Feature Request or Enhancement
Please add support for M5Stack Core 2 (https://www.cnx-software.com/2020/09/01/m5stack-launches-core2-esp32-iot-development-kit-with-2-inch-touch-display/#:~:text=M…
-
Main Issue:
The board won't properly boot up after code is successfully flashed.
It appears to me that the code can't fully load, and isn't even getting as far as void setup !
-----------------…