-
i tried this on 16.04. it loaded the module but there were mistakes while executing ./magicmouse2_build.sh and now apple keyboard and mouse can be paired but are not working anymore.
-
Hi,
I'm wondering if you have researched what's the effort to support 3rd button and scroll?
Thanks
-
I've installed the driver according to the instructions. Everything works great, however when I restart the system for any reason, the driver is not loaded at startup. I am forced to load it manuall…
-
I have to run
echo -n "0005:004C:0265.0004" > /sys/bus/hid/drivers/hid-generic/unbind
echo -n "0005:004C:0265.0004" > /sys/bus/hid/drivers/magicmouse/bind
to make this work. 0x265 is listed in …
-
Hello @robotrovsky
may I ask in the first play, how you where able to determine all the values for the driver? Reverese-Engineering by intercepting the communications?
I am interested in the f…
-
I had this module working in 18.04 with the 4.20... kernel without issues. I know it has been implemented into the release but the scrolling isn't working. I've tried rmmod and insmod under the 5.0.0-…
-
Hi,
first of all, that you very much for this project!
I've ran into an issue, that when the mouse is re-connected after it disconnects itself (which is a known issue it seems) and /opt/magic-m…
-
I've documented details of my observations here: https://forums.gentoo.org/viewtopic-t-1089352.html
In essence I cannot get the gen-1 magicmouse to middle click or v-scroll or h-scroll.
The hid…