-
![IMG_3024](https://github.com/QIDITECH/QIDI_Q1_Pro/assets/161778185/744753e7-0cae-4960-93b2-fb556d545e9d)
-
I'm not sure why but mainsail urls from this project can't ever be accessed directly.
For example
http://192.168.40.220:4000/console
or http://192.168.40.220:4000/heightmap
It gives a 404 not f…
-
When starting mainsail I now get the followijng error message
Deprecated Klipper Option
Option 'max_accel_to_decel' in section 'printer' is deprecated and will be removed in a future release.
-
"Place Eddy Approx. 20mm above the bed.
From Mainsail or Fluidd run command LDC_CALIBRATE_DRIVE_CURRENT CHIP=btt_eddy
Type SAVE_CONFIG to save the drive currant to your config"
This did not work …
-
### Description of the bug
was using slicer just fine would upload everything then the next on i tired to it wouldnt it said it did but never showed up in mainsail
### Project file & How to reproduc…
-
https://github.com/OrloDavid/Vibrant_80s_Klipper_Mainsail_Theme/releases/tag/v1.0.0
-
### Mainsail Version:
2.11.0
### Browser:
Other (Please tell us below)
### Device:
Other (Please tell us below)
### Operating System:
Other (Please tell us below)
### What happened?
While wor…
-
I had kTAMV working before, but I updated klipper and now I get an error when klipper tries to start:
"Section 'ktamv' is not a valid config section"
I've tried to re-install kTAMV with the comman…
-
**A set of Quality of Live Features would be helpful for debugging and keeping Code clean.**
Following Features should be in FC as a information and gcode file output:
- Slicer (to be displayed …
-
Your issue may already be reported! Please search on the [issue tracker](https://github.com/Ankermgmt/ankermake-m5-protocol/issues) before creating one.
**Describe the solution you'd like**
To pro…