-
currently i am using a replicator 2x with the serial port dev\serial\by-id(some ID here) and the baud rate of 115200 and i selected the makerware driver. For some reason when i go to upload my print…
-
Hello,
I am trying to connect up my Makerbot Replicator + printer to my computer via python and obtain data. I found your library and decided to try it. I have carried out the setup.py step and I ent…
-
### Description
Hello i try to find a porting for mightyboard Rev G and H , i see nothing was made fro this board with mega1280
and termocouple sensor ADS1118
### Feature Workflow
i find t…
-
Hello,
I have a extra board from makerbot replicator 2. It is possible to flash sprinter firmware on it?
Thank you
-
I'm getting no identified bots back from the discover() method, even though I am sure my Makerbot 2 is connected to the same network as my PC (I am able to ping the printer directly from my PC).
W…
-
If you find yourself laying out a new revision, can you add support for powered end stops, these are very common on 3D printers and can be had for pennies, they include all the filters at the switch e…
-
[spool holder assembly_Bayonettadapter v2.zip](https://github.com/user-attachments/files/17002634/spool.holder.assembly_Bayonettadapter.v2.zip)
i made an replacement for the bayonett ring just a si…
-
OctoPi with a Makerbot Replicator 2X
I am trying to have it beep, however it doesn't appear to respond to the M300 command ( M300 S300 P1000 ) from the terminal or from within Gcode file.
I have…
-
### Cura Version
5.8.1
### Operating System
MacOS
### Printer
Makerbot Method
### Reproduction steps
Fan speed and regular fan speed set to 100%
Initial fan speed set to 0%
Regu…
-
```
What steps will reproduce the problem?
1. Simply print
2.
3.
What is the expected output? What do you see instead?
I would like a continuous print. The Makerbot seems to pause in mid
operation a…