-
Is it possible to use OBAL with MangoPi MQ-Quad MCore-H616?
-
I bought a development board called [MangoPi MQ-Quad](https://linux-sunxi.org/MangoPi_MQ-Quad)
It has H616 Soc and an empty SPI flash pad
![1665290160684](https://user-images.githubusercontent.com/…
-
I can’t get the i2s interface to work. When I run cat /sys/kernel/debug/pinctrl/300b000.pinctrl/pinmux-pins I don’t see the pins defined for i2s.
> root@debian:~# cat /sys/kernel/debug/pinctrl/300…
VGCH updated
11 months ago
-
Is there an example of how to use the Dockerfile properly?
```
[machinehum@whitebox Buildroot-YuzukiSBC]$ docker build -t buildroot-yuzuki:1 .
DEPRECATED: The legacy builder is deprecated and wil…
-
# Steps
- git clone mangopi-buildroot-overlay
- git clone buildroot
- exported to shell environment the variable `BR2_EXTERNAL_MANGOPI_MQ_QUAD_PATH` to mangopi-buildroot-overlay root path
- chec…
-
I tried to compile & run the bootloader along with the attached kernel zImage and dtb, but was never able to get any logs from the kernel.
# Related Hardware
LCTechPi-PC-F133-v1.2 [(schematic + inf…
-
After using this dtb file, the power LED is dead. Confused me a lot with the device status.
And there's no signal on HDMI output.
-
Hello,
Thought I'd report this as a follow up to the loader issue I've had. Now I've been able to test loader from Windows as well as the Linux version using a MangoPi MQ-Quad.
Software: Debian …
-
Hey, I'm trying to include this driver in my kernel configuration and I'm failing to get it to compile properly. I appreciate any help!
-
So far, I could run Tina Linux which is from the [RELEASE](https://github.com/YuzukiHD/YuzukiChameleon/releases) page.
Though it is said to support Tina Linux, Ubuntu, and Android TV firmware,
the…