-
**Description:**
One of many, many problems with WinCE software. Some titles don't detect rumble at all. Some titles advise that an unsupported accessory has been connected when rumble is enabled, an…
-
Hi! I am the author of [MaplePad](https://github.com/mackieks/MaplePad) which is a Dreamcast controller emulator based on Charlie Cole's Pop'n Music Controller project. It's primarily intended for Dre…
-
Hi @mackieks, this is not an issue but a question. Do you think it would be possible to run this project (at least the VMU emulator) on a [Badger 2040](https://shop.pimoroni.com/products/badger-2040)?…
-
hi Sir
bug1
test 1.4b pio and found the i2c OLED display can't working , once connect I2C OLED display Dreamcast was disconnect PIO board
the screen on OLED as below
![image](https://user-images…
-
I'm use the release v1.4c-arcade on my raspberry pico. In memory menu on bios look like i connect and quickly disconnect the controller, and in 240p test suite in "Maple Devices" item, when i select t…
-
Hi Charlie! First off, let me say thanks for writing this well-organized Maple Bus transceiver code! I [forked your codebase](https://github.com/mackieks/MaplePad) last year and have made tons of prog…
-
The maplepad works with raspberry pico with default 2MB SPI memory? Because i wish build an a "easy" DIY board for my arcade stick.
-
Is it possible to make an arcade stick version for this? Basically the same thing, but using C and Z buttons instead of L and R triggers, since digital inputs are better than analog for arcade sticks …
-
Finally got this working, but I wired one and I found that it only works on the first controller port.
I tried it on Marvel Vs Capcom 2, which grays out the Vs mode option if there are less than t…