-
After [accepting the alpha version of the code](https://github.com/Koenkk/zigbee-herdsman/pull/317), now I propose to write comments here until we complete the development.
The adapter is designed …
-
Hello,
Can you please check if the pinout below is correct.
Also it seems that this module has different pad numbers as per table 2-1 from [Tuya V2.0.0](https://fcc.report/FCC-ID/2ANDL-TYZS4/447…
-
Hello,
First of all i would like to say thank you for your commitment and effort on this!
I recently bought Tuya Smart Gateway model GW-018 (wifi + ble + zigbee) (https://a.aliexpress.com/_EjwjehJ)…
-
## Hi Gary !
I have some very strange observation then sleeping end device is direct connected to one coordinator and is pulling its parent (the coordinator) or trying sending one attribute report …
-
### Link
https://www.zigbee2mqtt.io/devices/LYWSD03MMC.html
### Database entry
```json
{
"id": 25,
"type": "EndDevice",
"ieeeAddr": "0xa4c138b32f2fcff4",
"nwkAddr": 47596,
"ma…
-
I just got my MHO-301 and flashed it to v0120 firmware. I'm using it with the Z2M add on in HA and it is reporting temperature and humidity.
However the Z2M GUI (in which is shows up as a MHO-C401N…
-
hi
this project on thingiverse https://www.thingiverse.com/thing:3655354 has been much fun to me
it was easy to remove a zigbee module from their light bulbs and then reprogramm it to work as a …
-
## What happened
IKEA E2001/E2002
Incorrect action recognition when long press left arrow / right arrow. Instead of expected action **arrow_left_hold** / **arrow_right_hold** Event **on** …
-
### The problem
### Issue
Coordinator crash when a new devices joins or re-join the network.
`ERROR (MainThread) [bellows.ezsp] NCP entered failed state. Requesting APP controller restart`
#…
-
This plug already has a [quirk](https://github.com/mdeweerd/zha-device-handlers/blob/lidl_ts011f/zhaquirks/tuya/ts011f_plug.py) but version 70 of this plug shows only one endpoint when it's new and th…