-
Hi,
At ADI's no-OS, we use `msdk` to run no-OS projects on several Maxim microcontrollers.
We try to support all of them through `msdk` but unfortunately the API (exposed functions and data stru…
buha updated
7 months ago
-
Hi Sir,
I used the MAX32625PICO to programmer GPIO sample code to the MAX32651EVkit. After entering Debug mode, the MCU control buttons and LEDs are work. When I unplugged the USB and plug…
-
I noticed that when setting up timers using the `MXC_TMR` API, targeting the MAX32650, that when a prescaler of 4096 is chosen, it does not actually take effect for the timer. For example, the followi…
-
According to the CMSIS-Pack 1.6.0 specification the version number for a required pack is optional, but leaving it out causes the plugin to attempt to install the required pack in the same version as …
-
Latest version of arm-none-eabi-gcc generates errors when building.
https://github.com/Analog-Devices-MSDK/msdk/actions/runs/4165218612/jobs/7207911293
-
Following this guide : [here](https://wiki.analog.com/resources/no-os/build)
I have tried to get into some of the project folders and build for maxim targets with no luck.
MAXIM_LIBRARIES is set an…
-
We have some devices which has exactly same flash controller, the changes between device to device are:
1. Flash start addr
2. Flash size
3. Flash sector size
4. RAM Size
As a sample [MAX326…
-
Hi,
I'm trying to get some readings in with MAX32650 of AIN0, AIN1, etc. external channels.
No matter what I provide on AIN0, AIN1, pins of the FTHR board, I always get the raw value 1 as readin…
-
I have been trying to use this with the AWS IOT SDK but the debug was not working as expected. When I went deep in I realized that there are 2 application bank and bootloader chooses the bank. More de…