-
Hello,
I'm working on low power modes and wakeup on MAX78000 and I noticed that the user guide says to write 1 to the lpwkst_clr field on register `PWRSEQ_LPCN` to clear the wakeup status flags (`P…
-
Hi
I want to enable distiller in training part for training here and I couldn't find a suitable command for it please guide me.
thanks a lot
-
The proposed enhancement is to add an ID check to the OpenOCD flashing routines (most likely in the scripts which call OpenOCD and give it commands). An OpenOCD script implementing ID check would...…
-
I am not seeing recompilation happen if I edit a header file and then recompile.
Minimal example to repro using VS Code hello_world example.
1. Clean and build the hello_world project. Observe the b…
-
## Issue template
- Hardware description: [MAX78000](https://www.analog.com/en/products/max78000.html) / Custom board
- RTOS: FreeRTOS
- Installation type: micro_ros_setup / custom static library…
-
Hello!
After using the synthesis tool for generating the C code for the RISC-V processor, there are make build errors while further flashing the code on the MAX78000EVKIT board using VS Code.
``…
-
```
Open On-Chip Debugger (Analog Devices 0.12.0-1.0.0-7) OpenOCD 0.12.0 (2023-09-27-07:53)
Licensed under GNU GPL v2
Report bugs to
Started by GNU MCU Eclipse
Info : Listening on port 6666 for …
-
Hi. I am modifying the cigar-10 program to utilize captured images from the onboard camera instead of the sample input. And it is not working now, as it predicts a cat in each image. I don't know what…
-
The struct-based API for SPI describes the function of automatically padding the transaction with the appropriate bytes if if rxLen > txLen.
On both MAX32670 and MAX78000 under the latest SDK, I …
-
I noticed that it's possible to train some simple early exit models via ai8x-training, thanks to codes such as the following:
https://github.com/analogdevicesinc/ai8x-training/blob/develop/train.py#L…