-
Hi, I have connected FM24C04B.
i2c scanner shows me this addresses:
```
01:07:29.324 -> I2C device found at address 0x50
01:07:29.324 -> I2C device found at address 0x51
```
but I have only one …
-
I need some help to test the memory devices as I do not have all of them.
The strategy:
- Verifying the device has / has not the Device IDs feature
- Testing the proper adressing scheme by usin…
-
```c
static void I2C_MemoryTransmit_TXE_BTF(I2C_HandleTypeDef *hi2c)
{
/* Declaration of temporary variables to prevent undefined behavior of volatile usage */
HAL_I2C_StateTypeDef CurrentStat…
HYP96 updated
2 weeks ago
-
I tried using Adafruit 256Kbit / 32KByte module with this library, while waiting for some RAK15004 modules to arrive.
The library example works fine with the RAK15004 module and 0x56.
Using the …
SSPW updated
6 months ago
-
adding #require "MB85RC.class.nut:1.0.1" to top of device.nut file generates error "no such public library mb85rc.class.nut in .../device.nut" but the previous MB85RC.class.nut:1.0.0 still works.
-
- Arduino board: Nano 33 BLE
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.15
- List the steps to reproduce the problem below
Brand new (just purchased) Adafruit FRAM…
-
I am trying to get the 128Kbit fuji fram working with your library but I am on Wire1 bus. In your library.cpp file I have tried to change Wire to Wire1 and WP pin from 13 to 21 but I still get Memory…
-
Hi,
I just built the hardware for the open rally computer, wanted to program it, followed instructions and ended up with the issue that is further on. What could be the problem do you think?
Thank…
-
It is possible to add support for Fujitsu's MB85RC fram series (MB85RC128A for example).
Thanks,
-
First of all thanks for your development for the community.
I would offer to you and the community these new read and write functionalities:
this library writes any types of values at the specific FRA…