-
Reference: https://forum.arduino.cc/t/giga-r1-usb-mass-storage-examples-has-anyone-managed-to-run-an-example-project/1127694
Several of us (@BobtheDog, @Kurte and me) have been experimenting with t…
-
-
It hasn't been detecting the PN532 at all while using the emulate_tag_ndef.ino example from this library.
I find it strange that it compiles but doesn't detect the module. Lots of 'unused variable…
-
**Is your feature request related to a problem? Please describe.**
At design time for a product, you want to be able to verify that the heap/mempool usage is bounded.
**Describe the solution you'd…
-
When using MBedOS in SAMR34 Xplained Pro with the following LoRa configuration I am facing the issue with enabling PABoost
Configuration used::
- Transmission Type : OTAA
- ADR : Disabled
- Data…
-
Able to compile and upload without issue but hard faults when opening the serial monitor. This board has no issue running other sketches from other libraries (MAX30101, LP55231)
++ MbedOS Fault H…
-
I received the error below on my device that uses the STML476 MCU. The device uses an LPC11U35 for drag and drop flash programing. The drag and drop update no longer works since this error is occurrin…
-
The I2C function signatures in codal-core and codal-mbedos are different (uint16_t vs uint32_t). This breaks i2c in mbedos since all base class function are noops.
https://github.com/lancaster-univ…
-
This is my test code for multicore, with PIO arduino framework:
```
#include "Arduino.h"
#include "pico/multicore.h"
void setup() {
multicore_reset_core1();
multicore_launch_core1(core1_en…
-
Dear all,
I use the nRF52840 DK with Segger Studio and a Micron SPI SLC NAND 2Gb (256MB) Flash memory. I have already implemented the basic write read and erase functions for the NAND chip and the…