-
Hello,
I know the question is not directly related to the library, but I still want to give it a shot, since I am a bit stuck there.
I have a MCP3561 with a MAX4208 amplifier to measure the voltag…
y3nd updated
11 months ago
-
I have the MCP3561 ADC but i only got i working with MCP3561_CONFIG3_CONV_MODE_CONTINUOUS command. When i try MCP3561_CONFIG3_CONV_MODE_ONE_SHOT_STANDBY i got 1 value but i can not get another one. Pr…
-
Hi everyone,
I'm trying to read what is written in SCAN register after doing the reset and the init. Then I'm sending the value to a Python program that displays it. I'm getting the right exadecimal …
-
src/mcp3564.c:158
When I compile the code, my compiler tells me, that _MCP3561_write() is called with a value instead of a pointer ant I think, he is right.
Current code:
```
void MCP3561_Reset(…
wdlut updated
3 months ago
-
Hi, I was trying to convert your code to my current code base and I'm was facing one issue related to the reset command.
Are you sure that `0b01111010` send the reset command ?
As you can see in…
-
Keep receiving a value of zero from analogRead. Moving this into its own issue from: https://github.com/nerdyscout/Arduino_MCP3x6x_Library/pull/5#issuecomment-1870591920
-
Hi Simon,
Sorry to reach out again, but there's no CS Low/High sequence before and after HAL_SPI_Transmit [here](https://github.com/fhnw-ise-qcrypt/mcp3564/blob/8e8f7346c8eaa48aad27445d73994b657d7a…
-
Hi there,
First off thank you for the useful library.
Just found an issue which prevent the user from using OFFSET CAL register.
Turns out the issue was a typo in [mcp3564.h](https://github.com/f…
-
as the datasheet said "The delay is only added in between two conversions of the same scan cycle. There is no delay added at the end or the beginning of each scan cycle due to the DLY[2:0] settings."(…
-
Hi,
Thank you for making this ADC library. It's one of the few library that support MCP3562.
But when I'm implement this code to my ESP32 S3 it seems to stuck in analogread infinite loop.
The d…