-
I get occasionally an error with klipper_led_effect:
```
MCU 'mcu' shutdown: Timer too close
This often indicates the host computer is overloaded. Check
for other processes consuming excessive CPU…
-
Hi, i Hope my question isnt stupid, but do you know, if there is a Chance to get a Sony Alpha to work with changing the MCU with a new one? I mean the Chip can be buy from Sony but Seems it is empty. …
-
Hi @Flora233333 , I've read your paper, what a wonderful project!
Btw, I am doing my thesis and would like to ask if you are currently continuing to develop this topic to deploy on MCU like STM32. If…
-
I love the design, great work! A couple things that would really take it over the top for me, namely the ability to use hotswap sockets and the ability to make it wireless. I'd love to use a Seeed XIA…
-
**Is your feature request related to a problem? Please describe.**
No
**Describe the solution you'd like**
I have been working with micro controllers that have attached touch screen displays an…
-
I just received my FYSETC ADXL Nozzle-Attached PIS module, flashed both my mainboard and the unit with the most up-to-date version of klipper from my host PC, and upon defining the module in my config…
-
To start the development of a printed circuit board, it is necessary to assign the microcontroller pins and develop a minimal program that will allow testing functionality on the development board. Th…
-
Test different cases where the RED is powered on but suspended or in sleep mode and measure the power consumptions.
Also test the "wake-up" functionality, either a CAN Gatekeeper waiting for a spec…
-
### What kind of controller is this?
extra MCU (MCU used specifically for the 3MS)
### Controller name
Fly-D7
### More information
https://mellow.klipper.cn/en/docs/category/fly-d7
-
I am having some issues to connect the uSMU to my laptop, I have tried flashing the device and I am getting responses from doing so as it displays the correct information of the MCU (the image below, …