-
Would allow us to automatically switch beef-board into bootloader mode and back to application code without having to unplug and replug the board.
Also serves as groundwork for flashing via a confi…
-
After I replaced the MCU in my K5 and flashed the Quansheng bootloader and firmware, I found that the screen displayed stripes upon startup and the device became unusable. I am quite puzzled by this…
-
Hi @MCUdude,
Thanks a lot for the awesome core! It really simplifies a ton of things.
I am using the core version `3.0.2` with Arduino IDE `2.3.2` and I want to add a new clock option to the `Cloc…
-
T1 firmware checks bootloader hash against the known whitelist, see https://github.com/trezor/trezor-mcu/blob/9afaeff36ff891ab9dbe48b0f514a273975f8cd0/firmware/bl_check.c#L29-L46
Maybe we should do…
-
### Problem
The `BOOT_MAX_IMG_SECTORS` setup currently requires modifications to the mcuboot repo to support boards with non-default values.
https://github.com/mcu-tools/mcuboot/blob/5d067f0e0ca…
-
On Atmel Samd/Same MCU, the bootloader regions are locked. This means that you cannot flash your own bootloader with probe-rs.
Tools like OpenOCD can modify the MCU Fuses like so in order to write …
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
Controller: …
-
In the actually documentation V1.0 are the wrong MCU Firmware configuration.
There are declared a bootloader offset with 8 KiB.
This creates issues and after compile tthis you can't get the serial…
-
Hello!
My MCU died a heroic death after short circuit to 5 V. I replaced it to the same model (STM32F446ZET6). I flashed bootloader as desribed here: https://github.com/bigtreetech/BIGTREETECH-OCT…
-
Hi there,
I'm converting to mainline Klipper using this excellent guide as part of my series on converting the SV08 to be a budget toolchanger:
https://www.youtube.com/playlist?list=PLGqRUdq5ULsNIN_…