-
I'm trying to use the BAS to read two DS18B20s, but it seems erratic from Python on a rPi 4B. I've just updated to firmware 2.01 which has made it work at all, but it's still not great.
I do the 'm…
-
In Python Library, I don't see any way to read or set the Real Time Clock.
Am I missing something?
-
@nikke344 is there any way you can post the source code for the Codesys package? In Codesys 3.5 SP20 there are a few compatibility issues as the package was compiled for 3.5 SP16 Patch 2. I got other …
-
The resistance stops at 30,000 ohms?
-
### nodejs-poolController Version/commit
8.0.1/e1e5190
### nodejs-poolController-dashPanel Version/commit
8.0.0/d4f24a2
### relayEquipmentManager Version/commit
_No response_
### Node Version
V…
-
It would be nice to be able to use the one-wire interface from the MEGA-BAS in REM. My original setup has some DS18B20 sensors mounted in my pipes. I have moved to a MEGA-BAS with some 10K thermisto…
-
rstrouse,
I could use your assistance. I had a working REM, Nodejs Pool Controller and Dashboard running for the past year or so due to your help when my intellicenter board died. I had an SD car…
-
The card is on I2c but when using megabs -list it can not be found. Chnaging ID same issue.
LED is short ON and Long OFF
i2cdetect shows most times but is missing sometimes.
```
pi@raspberrypi…
-
### nodejs-poolController Version/commit
7.7.0 / 18396ae
### nodejs-poolController-dashPanel Version/commit
7.7.0 / 78c01be
### relayEquipmentManager Version/commit
7.5.0
### Node Version
v12.1…
-
I recently (~1 week ago) updated the firmware on the board but am having trouble using RS485 comm, so decided to try another firmware update. Now I'm getting the following error:
pi@poolpi:~/megab…