-
The http://docs.resin.io/#/pages/hardware/meta-resin.md document needs information on the steps needed after the resin yocto layer was created.
We can generalise these steps in README.md (meta-resi…
-
Update https://docs.resin.io/hardware/meta-resin/ with info from https://github.com/resin-os/meta-resin/blob/master/contributing-device-support.md
-
We already do that in board specific repos, such as https://github.com/resin-os/resin-allwinner/blob/master/layers/meta-resin-allwinner/recipes-kernel/linux/linux-mainline_%25.bbappend#L40-L47 and htt…
-
The guide https://github.com/resin-os/meta-resin/blob/master/contributing-device-support.md must be updated to reflect latest changes in meta-resin 2.0.0
-
See ~~https://github.com/resin-os/meta-resin/issues/478~~ https://github.com/resin-os/meta-resin/issues/608
Waiting on ResinOS to expose this in the boot partition (or for the ability to read hosta…
-
To enable support for PCI Express Intel network cards, would the change take place here?
resin-intel/layers/meta-resin-genericx86/recipes-kernel/linux/linux-yocto_%.bbappend
https://github.com/res…
-
Build of resin-raspberrypi fails on CentOS 7.1 for platform raspberrypi3-64.
make[2]: *** No rule to make target `zImage'. Stop.
zImage is not a supported Target on aarch64 linux platform KERNEL…
-
I've done some basic work in trying to get the odroid C2 booting resin, however I'm not terribly familiar with the resin build system. Using the master branch of resin-odroid, and simply adding the *.…
-
see https://github.com/resin-os/meta-resin/issues/809
-
Running a yocto build for odroid-xu4 yields the following warning:
```
WARNING: /work/resin/resinos/resin-odroid/build/../layers/meta-odroid/recipes-kernel/linux/linux-stable_4.10.bb: Unable to ge…