-
-
What's the unit of the FM modulation bar? I guess "kHz", because the red range starts at 70.
A 50 kHz modulated signal is shown with a value of about 70. This matches with the datasheet's 100 = 75 kH…
-
Hello,
I have 2 Huawei inverters, I have the information for both of them. My question would be if it's possible to read out the data from the smart meter linked to the inverted as that would give…
-
### Expected Behavior
Meter information should be read out for a screenreader user.
### Actual Behavior
Currently, Voiceover doesn't have access to read chart text information; just read out as "…
-
It's hard to figure out from the documentation what a Meter is.
It doesn't appear in the Glossary and the page [concepts/signals/metrics](https://opentelemetry.io/docs/concepts/signals/metrics/#meter…
-
Bonjour,
J'ai connecté le Zlinky_TIC en ZHA sur mon Home Assistant (Core v2024.9.3) qui se trouve à moins de deux mètres du capteur. Les données remontent bien, et je reçois certains attributes nor…
-
Based on the post tagged in #31 referring to #28, I have tried to get it working but get an i2c failure.
with both meters connected I can flash just water or just gas and it works fine.
below …
-
### Before submitting a new icon request, please confirm the following:
- [X] I have [searched all issues](https://github.com/Templarian/MaterialDesign/issues?q=is%3Aissue) to make sure there isn't a…
-
Would you consider making a standalone version of your metering plugins, so they can be used outside of a DAW or plugin host?
-
![image](https://github.com/user-attachments/assets/bfebe744-17f2-41bc-8871-aaf5c1a5ea41)
- [x] #63
- [x] #64
- [ ] #65
- [ ] #66
- [x] #67
- [ ] #68
- [x] #69
- [ ] #70
- [ ] Create symbol…