-
Hello,
Do you have any info on how to advance this library to read ISO15693 tags (with CLRC663) ?
-
// Use the manufacturer default key...
uint8_t FFkey[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
mfrc630_cmd_load_key(FFkey); // load into the key buffer
FFkey I need to validate t…
-
How to receive information from Android NFC enabled device using MFRC630?
-
Sometimes it is 0x2A, and sometimes it is 0x2B, which will cause me to fail when initializing the card reader. How can I keep it unchanged?
-
Thanks for sharing this project.
I noticed that in the Arduino example code, there're references to function calls such as `mfrc630_iso14443a_REQA` that is not defined anywhere in the project. Could …
-
When I use the example code from Pyscan, replacing MFRC630.mpy with MFRC630.py (mpy file not working) I get wrong UID length on any 7 byte UID length cards, it always returns 4 byte UID.
tbitu updated
3 years ago
-
Hello,
when some conditions are met (tag is on the limit of the reader range), then it is possible, that reader return `rx_len` as 0 in `mfrc630_iso14443a_select()`:
https://github.com/iwanders/MFRC…
-
If it were to just try and detect the presence of a card for which just need to run the loop code at 5ms delay and just check if (atqa != 0), but with this the arduino is giving output even without th…
-
We are using the custom board with the Reader ic is CLRC663 and SPI is used for the interfacing with microcontroller. SPI is configured as mentioned in the Datasheet of the clrc663 reader.The issue is…
-
Please add in the [Adafruit_MFRC630](https://github.com/adafruit/Adafruit_MFRC630) repo to the library manager? Thanks!