-
NAME: Door and window sensor Backdoor 2
ID: blt.3.1c9nn0ts0e400
BLE KEY: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
MAC: E4:AA:EC:4D:**:**
IP: 188.29.198.137
TOKEN: …
-
-
Thank you for your project.
In the past period of time, I have been using this project and it is very stable.
But I recently added a new device, and it send data by broadcast.
the logs display foll…
-
请问下，我们在BLE广播中，是否可以同时广播两个事件，即温度+电量 或者湿度+电量的形式。 我这边使用nordic 52832的SDK中，看代码是支持设置obj_num的数量
…
-
Hello,
I'm trying to use bleparser to read sensor data from SU001-T device but it looks like I'm only getting tracker basic data and sensor data with motion etc is empty for whatever reason..
he…
-
Inputs from @matthias-schulz
~~~~
yee-rc detected as F8:24:41:C1:D1:1F (Yeelink) -67 dBm.
│ Handles │ Service > Characteristics │ Properties │ Data │
├──────────────┼…
-
My multi-mode gateway 2 firmware version is 1.0.6.
I did not find my door lock model in **devices.py**, so I found a similar model with the following code:
# BLE devices can be supported …
-
I changed backup location from Google Drive to OMV NAS (local) and it loops. Any help is appreciated. Otherwise, how can I stop this?
###### Description:
```
If you have anything else that could he…
-
### Sensor Description
https://www.linptech.com/1428091205.html
### Additional information
[e.g. a link to product details, etc.](https://www.linptech.com/1428091205.html)
### BLE advertisements
…
-
### Sensor Description
loock.lock.s50f
### Additional information
MODEL:
loock.lock.s50f (Same as v16 but contain faceID feature)
https://www.lockin.com.sg/product-page/lockin-push-pull-sma…