-
I just got a brand new SK20 star projector. I had everything ready and was ready to flash it, but no matter what I tried I couldn't get it to go into access point mode. If I hold the power button, the…
-
Create firmware for [Particle Photon ™](http://particle.io).
## Desired Capabilities
- Must be able to receive commands over WiFi
- Must be able to go forward, backward, and turn from giv…
-
The arduino firmware crashes/freezes randomly (only) when run on RP2040 with the MCP23X17 running as a task on the 2nd core (works without issues on ESP32). I have already analyzed for potential cause…
-
Hello
I have a chinese thermometer with PHY622 microcontroller (smth like this https://pvvx.github.io/TH-05/). I wired it up like this:
adapter -> board
VCC -> VBAT+
GND -> VBAT-
TX -> RX1
RX…
-
### What happened?
Leds are flickering in all kinds of colors and cant acces the webpage.
Its an Esp32 with six channels
### To Reproduce Bug
WLED firmware WLED 0.15.0-b3 works well. All ver…
-
(I am only half joking here)
The keyboard has an upgradable firmware and a documented microcontroller:
https://support.lenovo.com/us/en/documents/pd026745
http://www.sonix.com.tw/article-en-1002-3048…
-
A This page - https://www.raspberrypi.com/documentation/microcontrollers/pico-series.html#debugging-using-another-pico-series-device - states:
"Pico 2 is not yet supported by debuprobe_on_pico debugg…
arc12 updated
3 weeks ago
-
I don't know what I did wrong, I followed the tutorial and flashed the Passthrough-firmware to the Sonoff 433Bridge R2 V2.2 (2021.01.19):
```
>python flashScript.py
Available COM ports:
1. COM1 …
-
### Description
A number of people have an XYZPrinting Da Vinci printer, and while it has a Repetier fork bouncing around, it's quite old now and the Marlin firmware would be a very nice upgrade.
…
-
Hello, i hope this comment can be read soon.
I have adquired 2 hoverboard and i'm trying control it by my self. In tutorials I read that their motherboard firmware must be changed, in this case, both…