-
Hi,
In our research project, we investigate the performance of MU-MIMO.
We have setup a small testbed with one AP and 4 stations, all using QCA9884 in the 5Ghz band. We connected stations using R…
-
In MUI, could create a Hotspot and connect to WIFI at the same time.
But this rom couldn't.
The WIFI signal is poor than MIUI's.
Maybe the 2x2 MIMO Wifi cause the problem?
-
I have my NIC card attached computer as an AP. I ping it from pixel2 which has 2X2 MIMO. However, the csi matrix is not consistently 2X3X30. Rather it varies between 1X3X30 and 2X3X30. That means the …
-
* **CPU**: NXP i.MX 8M SOC (quad Cortex-A53, Cortex-M4F)
* **GPU**: Integrated GC7000 Lite Graphics
* **Memory**: 1 GB LPDDR4
* **Storage**: 8 GB eMMC
* **Features**:
* Wi-Fi 2x2 MIMO (802.11…
-
I have my NIC card attached computer as an AP. I ping it from another device which has 2X2 MIMO. However, the csi matrix is not consistently 2X3X30. Rather it varies between 1X3X30 and 2X3X30. That me…
-
*tacuar:*
DEVICE: ASUS RT-N15U
***************************
CPU1: Broadcom BCM47186B0 (500 MHz)
FLA1: 8 MiB (Macronix MX25L6405EMI-12G)
RAM1: 64 MiB (Micron MT47H32M16HR-3:F × 1)
WI1 chip1: Broad…
-
hi:
when i use 5.8GHz and 11na 2x2 mimo
in ar9300\ar9300_phy.c
extern void
ar9300_adjust_reg_txpower_cdd(struct ath_hal *ah,
u_int8_t powerPerRate[])
when i set power 1
cdd_…
-
Hi @lucasdemarchi thanks a lot for last help with ArduPilot. According documentation. Intel AeroBoard has both Wifi and Bluetooth (Intel® Dual Band Wireless-AC 8260; 802.11ac, 2x2 MIMO Wi-Fi + Bluetoo…
-
So... in #38 and #22 I tested the Intel AX200 Desktop Kit (via M.2 to PCIe adapter) and the EDUP Intel AX200 PCIe card, respectively. The most recent video I posted was [I lied... WiFi 6 on the Raspbe…
-
Hi, the layout only support same frequency at two channel. I want to set different frequency at two TX/RX channel, do you have any idea about it?