-
Hello...
I'm having trouble running ConfigurableFirmata.ino with the board MKR1010 Wifi. Is it actually possible? The problem lies with using the appropriate WiFi library. Which one should I use?
…
-
I used your info to successfully connect an Arduino MKR1010 to a Renogy Wanderer 10A (model # RNG-CTRL-WND10) charge controller. The MKR1010 natively has Serial1 on pins 13 (RX) and 14 (TX).
In the…
-
Hi thanks for the amazing guideline
I've read #2 and #3 but still facing rc=-2 problem as below
16:48:04.885 -> Getting the time from time service:
16:48:04.920 -> Current time: 29. August 2020…
-
We tried multiple MKR1010 boards with multiple different WifiNiNA FW revisions but could not establish a stable connection via wifi (or at the wast majority of the cases even connect). We have a grid …
-
I have a PLC with fixed ID that my Modbus TCP server using MKR1010 is trying to poll.
How will I assign the slave ID into the server for communication?
-
Hi everyone,
**Tested on Arduino MKR 1010**
Following the issue #24 , I tried to control the RGB Led, while connected to a BLE device.
Using a bit of _Example/ArduinoBLE/Peripheral/ButtonLED_…
mcxiv updated
11 months ago
-
I am looking for someone to write this application for me to use on MKR1010 i dont have enough experience in the webpage generation etc.
-
Hi,
I'm working with a MKR1010 and I realised something was wrong with the detection of a connected central.
In my code, I'm using `ArduinoLowPower` and `ArduinoBLE` library.
Let's say my sm…
mcxiv updated
3 years ago
-
Hi 👋🏻
I have been struggling some time to connect my Arduino MKR1010 to the Arduino IoT Cloud by my university wifi network, which asks a username and password (WPA2 WiFi network).
For Arduino M…
-
A significant web server sketch running on an MKR1010 experiences random "disconnects" which are not really disconnects since the status returned is 255 and not any of the valid status codes listed. F…