-
Hi All,
For some years I have been managing about ten repeaters based on MMDVM / Arduino2, before we used the SD image created by the UTAH group today we use the universal Pi-star for convenience.
…
-
Hi!
Great talk @ SDRA...
It would be nice to support DMR/DStar/YSF modes in QRadioLink. So how do we go about bridging MMDVM ?
As you have ruled out mbelib, I guess another option is based …
-
See #2, lower priority since this requires embedding the md380 vocoder into the container
-
Hello, I've setup another machine to build the mmdvm suite, openwrt build just fine but if I use this repo to build the mmdvm suite I have this error about the libwxwidgets. Did you guys changed somet…
-
My mmdvm is not recognized from the pi 5
-
**Describe the bug**
FM Network will Automatically trigger PTT , when the 5V2V power supply is unstable
Listening in Allstarlink sip VoIP, will hear the noise , and will also will TX to DVSwitch …
-
Good Afternoon,
Looks like for ipsc_to_mmdvm.py there should be a ipsc_to_mmdvm.cfg file somehwere? Can you advise on where that is or how to create it?
Thanks!!
73
ghost updated
2 years ago
-
To be more drop-in replacement for gw_hytera_mmdvm we need to support DMRGateway
per discussion at https://github.com/g4klx/DMRGateway/issues/99
We need to support 3 protocols, and 2 of them wil…
-
Hello!
I try to install MMDVMHost into Synology Virtual Machine.
First I install Debian 12 (clean install).
Then I make MMDVMHost
I get the same error every time I try to start MMDVMHost: **una…
-
Hi! I'm trying to get this up by installing libzmq and running make on a raspberry pi 4(64 bit image) and it is failing to compile after ab1cc22.
```
pi@mmdvm:~/mmdvm-sdr/build $ sudo apt install…
MrARM updated
3 years ago