-
Hi,
ich beschäftige mich gerade mit der Modbus Schnittstelle.
Mit ist bei der Implementierung aufgefallen, dass nirgends der Datentyp der Register steht. Insbesondere ob U32 oder I32.
Viele Grü…
-
Hey,
is ist possible to install modbus proxy addon twice on Home assistant. I habe two inverter who must be added to two clients.
Thanks
-
Если при условиях настройки, к примеру, 9600:8:N:1 у OmodSim и аналогичных OmodScan, я получаю сгенерированные данные. То при настройках 9600:7:N:1 или 9600:8:N:2 или 9600:7:N:2 у OmodSim, OmodScan о…
-
### Describe the bug
It seems that corrupt mobus data gets accepted from the LSE-3 Logger. Yesterday at 2am the all the data in the following category where completely random for one response: Electr…
-
**Describe the problem you have/What new integration you would like**
Home Assistant has an integration for water heaters:
https://www.home-assistant.io/integrations/water_heater/
I would like t…
-
Hi,
node-modbus-serial works only when baudRate is 9600.
When I change it to 19200 or 115200 - it does not work :(
It is very important for my project. Serial port is working with my NFC card rea…
-
We at Mobus Operandi frequently forget to start the timer. So we had this idea when the driver starts screen sharing the timer would be started automatically.
We are using Jitsi Meet in a browser …
-
Solis has increased the data updates from 5 to 1 minute on my request. I see the change in the Soliscloud portal. There data is updated every minute, but in HA the update frequency stayed at every 5 m…
-
Hey,
Is it possible to query slaves in parallel? The idea is that I am already connected and send two requests in parallel, then one request is not processed at all. Only if I make a delay between r…
-