-
### Is your feature request related to a problem? Please describe.
No
### Describe the solution you'd like
Is it possible to add Modbus TCP communication to the project?
### Describe alternatives …
-
Hello,
First I want to say thank you for this project! I started to build my self based on modbus tcp/rtu over wifi and raspberry pi, but this project have nice features like MQTT, OTA update, keep…
-
Hallo Leute,
letzten Freitag haben wir einen Fenecon Home 10 mit einem 8,8 kWh Speicher in Betrieb genommen.
Alles wurde Fachgerecht installiert und leider erst um 19Uhr in Betrieb genommen, sodas…
-
### The problem
When using a docker image later then 2024.3.3 the modbus connection will fail after about two days and just comes back up when restarting the inverter and HA.
### What version of Hom…
-
The modbus integration has stopped working with the latest HA update. The log shows:
Logger: homeassistant.components.modbus.modbus
Source: components/modbus/modbus.py:383
integration: Modbus ([d…
-
I want to be able to read holding registers in "blocks" (i.e a group of registers) and also as single registers. Here's my attempt at doing so:
Slave code on an ESP32 s3
```
#include
#include
…
-
When a Modbus RTU device is setup with a baud of 4800, FUXA does not wait long enough for the transmission to complete before throwing an error, e.g.:
"2024-03-10T04:59:22.271Z [ERR] 'Weather St…
-
### System Health details
## System Information
version | core-2024.6.4
-- | --
installation_type | Unsupported Third Party Container
dev | false
hassio | false
docker | true
user | abc
vir…
-
Describe the bug
The esp32 UART rx FIFO threshold is fixed at 0x16 bytes, leading to premature end of frame detection and incorrect decoding of Modbus packets larger than 0x16 bytes.
When Modbus…
-
### Which node-red-contrib-modbus version are you using?
5.31.0
### What happened?
I am testing this library to read the Delta PLC DVP14SS2 controller, which operates in Modbus ASCII mode. I …