-
### Describe the bug
Enabling the setting "Verhindere Entladung im Schnell-Modus und bei geplantem Laden." does not lock the battery but it appears an error in the log:
[site ] ERROR 2024/09/09 18:4…
-
My main meter is being replaced, and I went from DSMR 2.2. to 5.5. The updates of the entities which. belong to the SMR 5.5 are 5 seconds in HA.
The updates of my SolarEdge entities are 30 seconds. I…
-
Finally i got a configuration for the Wattsonic Gen 2 inverter that reads pv/grid/battery power and the battery SOC
The same inverter (at least Gen3) is distributed as Sunway, Solinteng, A-Tronix a…
andig updated
1 month ago
-
**Design Document** [Liquid Cooling Leak Detection](https://gerrit.openbmc.org/c/openbmc/docs/+/73152)
**Naming**
- phosphor-liquid-cooling
- phosphor-liquid-leak-detection
**Maintainers**
…
-
### Describe the bug
With evcc 0.130.4 Wong charging status is reported with the Delta AC Max Basic. Although no vehicle is connected, evcc states connected vehicle. Refer to:
https://github.com/…
-
### Describe the bug
Hallo
kurz zum Setup:
1 LoadPoint mit Wallbox
2. Loadpoint Wärmepumpe Pool
Huawei Sun2000 System mit Batteriesteuerung
wenn ich auf schnell Laden schalten sperrt es ja die…
-
When I run semp-tcp.py i get this error:
root@SEmeterproxy:/solaredge_meterproxy# python3 semp-tcp.py -v
2023-05-13 10:56:28 WARNING: No meters defined in semp-tcp.conf
Traceback (most recent ca…
-
When it is necessary to adjust incoming or outgoing values it is currently possible to define an offset on the original value using profile "Offset".
Unfortunately some devices deliver float values…
-
### Describe your feature request
As per the wall charger feature request, this 'issue' is intended as a location for people to be able to start gathering information and discussing how it works an…
-
When a Modbus Gateway is used for connecting multiple slaves on single IP only one slave data is recieved.
I used a mgate as a gateway to connect multiple energy meters on single IP
I created mul…