-
Add support for MODBUS RTU using any free Aux port in conjunction with a UART to RS485 converter and an IO_OUT pin to control the transmitter.
-
Hi!
I'm testing the following code as a link between https://sourceforge.net/projects/qmodmaster/ and https://pypi.org/project/pyModSlave/. As hardware, I'm using a NodeMCU 1.0 and a USB/TTL conver…
-
I have been trying to use this program with this card:
https://mikroelectron.com/Product/Modbus-RTU-4ch-Relay-12v-RS485-Module-4-Input-Optocoupler-Isolation/
but it does not work. What could I be d…
-
Receiving the following error if I want to build using Typescript. Before I was just running the plain Javascript.
```
jsmodbus: 4.0.6 (Since that is the last one published on npm)
seri…
-
Hi.
I have a setup with a Growatt Shinemaster.
It's a Modbus collector for up to 64 devices.
My problem is, when I want to setup my DTSU666, the connection can't be established.
I realized that …
-
**Description**
When using FUXA with Modbus devices, data cannot be received by FUXA. This was tested for two different devices, resulting in _readMemory CRC errors for one, and both CRC errors and …
-
I have been having endless issues with timeouts on the rtu serial reads. So I have written a unit test to try and see what is wrong.
My read seems to take about 20 -30ms to send and reply,, this i…
-
Hi.
Ill try to make a bridge for RTU to TCP but when i use the modbus poll, to check the Modbus TCP, i cant connect with modbus TCP, only with UDP. And i really lost in the port selection, because…
-
I made a configuration file for an INVT110XG with LSW5 logger.
It works and logs 91 entities to Home assistant.
I attached the yaml file as zip file. and the manual and modbus address list. If som…
-
https://github.com/slowtec/tokio-modbus/blob/main/examples/rtu-server.rs
```
impl tokio_modbus::server::Service for Service {
type Request = SlaveRequest