-
### The problem
Moving to 2024.11, Modbus tcp does not start since the core expects baudrate, parity etc ?
### What version of Home Assistant Core has the issue?
2024.11
### What was the last work…
-
### Is your feature request related to a problem? Please describe.
There is a Modbus TCP-ready energy meter in the meter cabinet that I would like to integrate in order to control the output of the i…
-
Hello, at the start of the post, you are doing great work and I appreciate it very much.
With the support of Modbus TCP in goodwe experimental integration in https://github.com/mletenay/home-assist…
-
**Is your feature request related to a problem? Please describe.**
Modbus TCP and RTU are widely used in fieldbus and industry.
**Describe the solution you'd like**
Qt has modbus module, project…
-
As originally requested in #708, it would be very useful to be able to interact with a modbus server using modbus TCP, ideally at the same time as ESPHome is polling it.
In other words, if there is…
-
I can use modpoll (https://github.com/gavinying/modpoll) to modbus data. But failed to get modbus data from modbus-cli.
Log messages of modbus-cli are as follows.
./modbus-cli --target tcp://172.16.…
-
Hi,
is it possible to use this library with Modbus RTU over TCP? I tried to do it using `connectTcpRTUBuffered ` but it wasn't working. I'm using [this converter](https://www.waveshare.com/rs485-to-e…
-
### The problem
Modbus integration causes memory leak. I have 14 energy meters connected via Modbus TCP (65 entities in total) and everyday I experience crash of HA production installation due to lac…
-
### The problem
When polling Holding Registers, response values get Randomly assigned to another slave entity of the same Modbus Client.
![Screenshot_20241117_073506](https://github.com/user-att…
-
Hello,
Core 2024.11.1
Supervisor 2024.11.2
Operating System 13.2
Frontend 20241106.2
SunSpec integration version 0.0.26 is fails SunSpec Modbus TCP connection at Add Integration action, with …