-
Is there any hope that the quidi xplus 3 printer will still be updated? When will klipper and moonraker be updated to support the obico commands?
-
Following [this guide ](https://www.obico.io/docs/user-guides/first_layer_ai/slicer-configuration-for-first-layer-ai-klipper-only/) , adding the suggested code in Orca Slicer and printing the print st…
-
The warnings:
> **Moonraker warning**
>
> Unparsed config option 'managed_services:
> moonraker-obico' detected in section [update_manager moonraker-obico]. This may be an option no longer avai…
-
My Obico is set to stop only the extruder heater when pausing a print when it detect a fail, but it also stop the bed heater.
The turn off bed heater was unchecked.
Any thoughts?
Thanks
-
Updating my mainsailos installation after half a year. Everything works, except for Janus.
I'm running into an error: precomplied/rpi.debian.10.32-bit/lib/libsoup-2.4.so.1: undefined symbol.
I …
-
When installing Obico from installer, it install many package from entware:
Can you provide me a full list what it can be uninstalled safely when removing Obico ? To keep clean OS.
-
One of the reasons I had for running klipper on the AD5m Pro was to use Octoeverywhere for remote connections! I had a feeling it wouldn't work, but gave it a shot anyways.
I had to run the script w…
-
### What happened
When attempting to add in a ov5647 camera on mainsail, there is consistently a no-signal when adding via the mainsail UI. Tested the camera module via CLI and was able to receive p…
-
recently my prints keep getting stopped out of the blue , I tried multiple files and slicers but with no luck, I started looking around and found out that my Pi memory is being full by one process whi…
-
There is a huge discrepancy between the times ( Estimated print time and ETA) reported in Klipper and the web and mobile app.
This is what Klipper shows
![image](https://github.com/TheSpaghettiDete…