-
We currently have issues with the pivot mechanism slowly creeping upwards after reboots. This usually doesn't effect competition, but it can and it wastes time during testing. The issue is caused by t…
-
It would be really awesome to be able to home an axis with dual motors (in my case dual y axis motors).
The idea would be 2 limit switches (on separate inputs or through some wiring) and 2 motors (o…
-
Im using the current BDsensor_beta, because i saw it's supposed to bring the real time leveling to klipper.
When i home my delta printer after using the
BDSENSOR_SET REAL_TIME_HEIGHT=0.32
comman…
-
The selector of the MMU2S currently homes against the "left" (non-motor) side of the [mmu2-pulley-body](https://github.com/prusa3d/Original-Prusa-i3/blob/MMU2/STL/mmu2-pulley-body.stl). As I received …
-
Thanks for making this library.
I have a clearPath SD auto-tuned to a vertical linear actuator.
I have set it so that every time enable is called, the motor homes to the lowest actuator limit.
…
-
When I run the homing command the axis moves ~5cm pauses and then resumes the motion. If I click the limit switch between when it first starts moving and initially pauses, the motor stops turning and …
-
> affordable DIY motor vehicles
Nope, not even remotely possible. Small engine repair is a semester long course, and small means a single cylinder.
Try instead, a bicycle. If you are handy with …
-
Hi All
I have corexy and upgraded to SKR mini v2.
I have a issue where Z homes wrong way using Probe and i cant change home dir to 1.
If i change #define Z_HOME_DIR -1 to #define Z_HOME_DIR 1…
-
* As a registering party I need to be able to:
* Search for financing statements so that I can see if a financing statement has been registered against an asset
* Enter search criteria so that…
-
Hi all,
I am trying to set up a small machine using the TMC 2209 driver and want to use the sensorless homing feature. So my idea is to have the stepper run until it reaches the end and have it stop …