-
when booting the mpu6050 you get a wierd error
-
which direction should i mount the GPS . What is the relation to the axis of mpu6050?
-
-
Hardware: RPi 4B 4GB
OS: Bullseye
DC: v5.0.dev3
MPU: mpu9250 on Robo HAT MM1 at hex address 0x69
IMU configuration in myconfig.py:
```
# IMU for imu model
HAVE_IMU = True
IMU_SENSOR = 'mpu92…
-
Hey, Im trying to use the setAddress() Method but im still only having the data from the 0x68 device. Can somebody help me?
```
#include
#include "Wire.h"
float currentAngleX_A, currentAngleY_A…
-
MPU6050 with INAV 5.1.0 not booting and connecting to inav configurator
I am facing an issue with the MPU6050 build with Inav 5.1.0
only the following changes are done for 5.1.0
1. CMakeLists.txt…
-
Reading through the multiwii forum I came across this:
http://www.multiwii.com/forum/viewtopic.php?f=7&t=3880
The MPU6050 is being used in low-accuracy mode because multiwii was designed for Wii s…
-
In dmpInitialize() function the Accelerometer scale is fixed in 2g and gyro in 2000 dpm. Is anyone made an effort to customize the Acc and gyro sampling rate and scale and Low pass filter?
-
WARNING: library MPU6050 claims to run on avr, samd, sam, esp8266, esp32, stm32, renesas, renesas_portenta, renesas_uno architecture(s) and may be incompatible with your current board which runs on …
-
Nice work, Im trying to make a gyro gamepad app with the mpu6050 sensor, what was your approach of merging the cardboard sdk with the bmi sensor output?
Thanks