-
` - name: "switch.dennamow"
command_topic: "CaSSAndRA/api_cmd"
payload_on: "{\"robot\":{\"command\": \"mow\", \"value\": [\"all\"]}}"
qos: 0
retain: false`
works fine…
-
Hello,
I have problem when I send data from my inverters to MQTT.
I receive a lot of errors with such message:
Old client with secret 1714733885990_8387 sends publish. Ignore! Actual secret is 1714…
-
I'm collecting infos about MQTT Discovery
```
{
"sw_version": "3.0",
"name": "GDOOR Gira Bus Adapter",
"force_update": true,
"icon": "mdi:door",
"state_topic": "gdoor/rx"…
-
**Describe the bug**
Disconnected and then connected multiple times with no response. Appears at specific time:
2024/05/16 09:20:37:849 I connected mqtt but there was no response, then I disconnecte…
-
> Sending an MQTT message at QoS1. To do this I need:
> To be able to receive the MG_EV_MQTT_CMD event in my code
> To get the message ID of the sent message
> To be able to set the attributes of…
-
I observe that by default, the ESP32 publish to MQTT under HMI and MAIN sub topic every 0.8s.
Is it raw data frequency rate between HMI and the main board?
Is it possible to choose the publishing freq…
-
Hello,
is there any way to use mqtt with authentication?
I was trying tcp://login:password@server_ip:1883 but no luck
mosquitto reports in logs:
Client disconnected due to protocol error.
…
-
# Describe the bug
The motion being communicated over MQTT is delayed. The aim is to use the motion to turn on the front lights which are not battery powered therefore saving on battery but the time …
-
Please update mqtt section to accomodate paho.mqtt new requirement - CallbackAPIVersion.VERSION2
-
**Project description**
**Metadata**
* homepage URL: https://mqtt-explorer.com/
* source URL: https://github.com/thomasnordquist/MQTT-Explorer
* license: creative commons
* platforms: lin…
LDprg updated
3 hours ago