-
Hello!
Been trying for weeks to get this working and I'm at a loss. Home Assistant, mosquitto MQTT, and govee2mqtt are all setup on Docker containers.
I have the mosquitto MQTT broker successfu…
-
**Describe the bug**
Sometimes after a time (very often between 10-11am) the deye-mqtt docker container looses the connection to the mqtt broker. After restarting the deye-mqtt container everything w…
-
There is a need for a standalone broker, that can run on either (ideally) a ESP32 or more likely a small RPI.
The trick will be relaying - I believe mosquitto may have that capability, but it need…
-
Hello,
I wanted to set up the script today and it actually does what it should except that it connects to my MQTT broker.
Here is an excerpt from the log:
`PS C:\Users\Try> rgb2mqtt-run -v
202…
-
Hello all,
I am facing an issue while trying to connect a rumqttc client (running on Windows) to a rumqttd MQTT broker (running on Linux). The connection attempt fails with the following error mess…
-
most of us try to maintain an dns server and it does not make sense to input an IP address instead of DNS, we are required to resetup the device with new firmware process to be able to get the mqtt wo…
-
### Is there an existing issue for this?
- [X] I have searched the tracker for existing similar issues and I know that duplicates will be closed
### Describe the Issue
can not establish MQTT connec…
-
Each sensor that is published into my mqtt broker shows as an individual device, rather than one devices with multiple entities, as you can see from my mqtt explorer, believe this is why it is not aut…
-
-
Is there a possibility in the development plans for the introduction into this project of the simplest internal mock MQTT broker, for which the transport level between tasks would be transmitted throu…